TM 9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
a. Set Up REMOTE CONTROL UNIT.
WARNING
Operate crane from left or right remote control
q
station if operator will not be able to see load at all
times during crane operation. Boom and load moving
out of control could cause serious injury or death.
Excessive noise levels are present any time the
q
heavy-duty winch or crane is operating. Wear single
hearing protection (earplugs or equivalent) while
working around equipment while it is running.
Failure to do so could result in damage to your
hearing. Seek medical aid should you suspect a
hearing problem.
Prepare crane for use (para 2-63a).
(1)
Set up outriggers (para 2-63b).
(2)
Raise boom and mast to operating position (para 2-63c).
(3)
Remove REMOTE CONTROL UNIT (1) and cable (2) from stowage
(4)
box (3).
(5) Remove covers (4) from cable (2) and cover (5) from REMOTE
CONTROL UNIT receptacle (6). Clean any dirt or water from
receptacle.
(6) Clean any dirt or water from cable connector (7).
receptacle (6).
