TM
9-2320-279-10-2
M984E1 General Operating Procedures (Cont)
(29) Make sure winch shift
lever (4) is at center
position.
(30) Make sure PTO ENGAGE
switch (2) is set to OFF.
WARNING
Do not operate winch while personnel are working on
or around tensioning device. Severe injury to arms,
hands, and fingers may result if cable moves while
working with cable and tensioning device.
(31) Pull back and hold tension pulley lever (19).
(33) Release tension pulley lever (19).
(34) Check that winch cable rests inside grooves of both tensioning device
pulleys (20) and sheave (21).
