TM 9-2320-366-10-2
Table 3-2. Troubleshooting (Cont)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
s. 15K SELF-RECOVERY WINCH (SRW) (CONT)
s1.
15K SELF-RECOVERY WINCH (SRW) DOES NOT WORK (CONT).
CAUTION
Hydraulic oil level must not be above, or more than 0.75 in. (1.9 cm) below black line
on hydraulic oil view gage. Failure to comply may result in damage to equipment.
NOTE
Perform step 2 on M1089.
Step 2. Check hydraulic oil level at hydraulic oil view gage.
(a)
If hydraulic oil view gage registers below black line, remove reservoir cap and fill hydraulic oil to
appropriate level (Appendix F).
(b)
Install reservoir cap.
Step 3. Check hydraulic lines and fittings for class III leaks.
If class III leaks are found or 15K SRW still does not work, notify Unit Maintenance.
STEERING HARD OR DOES NOT WORK.
Step 1. Raise cab (para 2-28a).
Change 1
