TM 9-2330-205-14&P
WHEEL AND TIRE
(Super Single Style)
This task covers:
INITIAL SETUP
Tools
Tools Continued
Handle, 3/4-inch square drive
Socket, wheel, 1 1/2-by 7/8- by
Jack, hydraulic
3/4-inch square drive
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Wheel and tire
Six capnuts
Using wheel socket, loosen nuts.
(1)
(4)
Do not remove nuts.
2. Axle
Wheel and
Using hydraulic jack, raise.
tire (1)
3. Hub studs (3)
12 capnuts (4)
Using wheel socket, remove capnuts.
4. Hub (2)
Wheel and
Remove.
tire (1)
INSTALLATION
5. Hub (2)
Wheel and tire
Position wheel on hub studs (3).
(1)
6. Hub studs (3)
Six capnuts
Using wheel socket, install. (4)
(4)
Tighten using illustrated
tightening sequence.
7. Axle
Wheel and tire
Using hydraulic jack, lower.
(1)
Remove jack.
NOTE
Have organizational maintenance torque capnuts using
torque wrench to 450 to 500 ft lb (610 to 678 Nm).