2 1/2 TON, 2-WHEEL, M200A1
Hard-time intervals and related man-hour times are based on
normal operation, The man-hour time specified is the time
you need to do all services prescribed for a particular interval.
Change the interval if your lubricants are contaminated or if
Drycleaning solvent PD-680 is both toxic and
you are operating equipment under adverse conditions,
Avoid prolonged breathing of vapors and avoid
including longer-than-usual operating hours. The interval
Do not use near open flame or excessive hoot.
Flash point of
may be extended during periods of low activity. If extended,
solvent is 138 F (59 C). Serious illness, injury,
or loss of
life could result from improper use.
adequate preservation precautions must be taken.
Dotted leader lines indicate lubrication is required on both
Clean all fittings and area around lubricating points with
sides of the equipment.
drycleaning solvent PD-680 or equivalent before lubricating.
(See Note 3.)
(See Note 4.)
(See Note 5.)
* The time specified is the time required to perform all services at the particular interval.