TM 9-2330-205-14&P
WIRING HARNESS REPAIR - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
RING TERMINAL REPLACEMENT
Using cutting pliers, cut off.
Terminal (10)
Wire lead (9)
14.
Throw away terminal (10).
Strip off insulation equal to the depth of
Wire (9)
15.
the new terminal (10).
a. Slide onto the end of wire (9).
Terminal (10)
Wire lead (9)
16.
b. Using crimping tool, crimp.
CIRCUIT BAND MARKER REPLACEMENT
Using a flat-tip screwdriver, open tabs
Marker band (12)
Wire lead (11)
17.
and remove.
Note number on band and throw band
(12) away.
a. Using the engraving tool, engrave the
New marker band (12)
18.
number.
b. Using crimping tool, put on wire lead
(11) and bend tabs over.
TA223318
