TM 9-2330-205-14&P
WIRING HARNESS REPAIR - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
RECEPTACLE REPAIR
19.
Connector (1)
Nut (2)
Using pliers, take off.
20.
Grommet (3)
Take out.
21.
Grommet (3)
Pins (4)
Pull out of grommet.
22.
Pins (4)
Wire leads (5)
Remove by melting solder with soldering
iron.
NOTE
Only unsolder the leads that need to be repaired.
23.
Pins (4)
Wire leads (5)
a.
Heat the solder well in pin (4).
b.
While solder is hot, insert wire lead
(5) into it.
24.
Grommet (3)
Pin (4)
Insert pin (4) into the grommet (3).
Follow chart to put pins in the
proper location.
25.
Connector (1)
Grommet (3)
Put grommet (3) into connector (1).
26.
Nut (2)
Using pliers, screw on.
TASK ENDS HERE
TA223319
