TM 9-2330-205-14&P
HYDRAULIC MASTER CYLINDER - CONTINUED
INITIAL SETUP
Tools
Tools Continued
Handle, reversible, 3/8-inch square
Wrench, open-end, 7/16-inch
drive
Wrench, open-end, 5/8-inch
Socket, 9/16- by 3/8-inch square
drive
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Fitting (1)
Brake line (2)
Using 5/8- and 7/16-inch open-end wrenches,
disconnect.
2. Master
Three nuts (4)
Using 9/16-inch socket wrench, remove
cylinder (3)
and three lock-
and take off master cylinder (3).
washers (5)
INSTALLATION
3. Air chamber
Master cylinder
Position on studs (6).
studs (6)
(3)
4.
Three nuts (4)
Using 9/16-inch socket wrench, install.
and three
lock-washers (5)
5. Fitting (1)
Brake line (2)
Using 5/8- and 7/16-inch open-end wrenches,
install.
TA223331
