TM 9-2330-205-14&P
HYDRAULIC BRAKE LINE REPLACEMENT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
AXLE TEE TO RIGHT SERVICE BRAKE
37.
Axle tee (1) to
Fitting (3)
Using 7/16-inch open-end wrench,
line (2)
remove.
38.
Connector (4)
Fitting (5)
Using 7/16-inch open-end wrench,
to line (2)
remove.
39.
Two clips (6)
Line (2)
Remove.
Discard line (2).
40.
New line (2)
Install.
41.
Connector (4) to
Fitting (5)
Using 7/16-inch open-end wrench, install.
line (2)
42.
Axle tee (1) to
Fitting (3)
Using 7/16-inch open-end wrench, install.
line (2)
NOTE
FOLLOW-ON MAINTENANCE: Bleed brakes (page 4-55.)'
TASK ENDS HERE
TA223335
