TM 9-2330-205-14&P
AIR RESERVOIR
This task covers:
a. Removal (page 4-60)
b. Installation (page 4-60)
INITIAL SETUP
Materials/Parts
Tools
.
Sealing compound (item 8, appendix E)
Handle, reversible, 3/8-inch square
drive
Equipment Condition
Socket, 9/16- by 3/8-inch square
drive
Draincock removed (page 4-59).
Wrench, adjustable
Wrench, open-end, 9/16-inch
Wrench, open-end, 13/16-inch
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
Air line (2)
1.
Using 13/16-inch wrench, disconnect.
Elbow (1)
Elbow (1)
Using adjustable wrench, remove.
2.
Air reservoir (3)
Using 9/16-inch socket and open-end
Two nuts (6), two
3.
Support clamps
lockwashers (7),
(4 and 5)
wrenches, remove.
and two bolts (8)
Using 9/16-inch socket and open-end
Two nuts (9), two
4.
Support clamps (4)
lockwashers (10),
wrenches, remove.
and two bolts (11)
Two support
Remove and lift air reservoir (3) from
Air reservoir (3)
5.
clamps (4)
support clamps (5).
INSTALLATION
Air reservoir (3)
Position on support clamps (5).
6.
Support clamps (5)
Two Support
Position on air reservoir (3) and frame
7.
Air reservoir (3)
clamps (4)
crossmember (12).
