TM9-2330-207-14
a. A welded steel tool box is fastened to brackets
on the left longitudinal frame rail and to the lower
edge of the left side rail.
b. The tool box door is hinged at the bottom with
a continuous integral hinge and has a slot in the top
center and two rotating latches. The slot fits over
a staple in the top edge of the tool box and permits
padlocking the door. The rotating latches are
operated by folding T-type handles, which when
folded, fit into recesses in the door.
c. The tool box for M127A1, M127A1C and
M127A2C is divided by a panel into a chain
compartment. The paulin compartment has a
wooden rack to hold the pauIin off the bottom
of the tool box.
Figure 2-17. Tool box, closed (M127 Series)
(Sheet 2 of 2)
2-18. KINGPIN
-- Used to couple semitrailer to towing vehicle.
a.
b. Protrudes from the center of the fifth wheel
upper plate of the semitrailer.
Figure 2-18. Kingpin
