TM9-2330-207-14
4-23. TAILLIGHT ASSEMBLIES (Cont)
g. Composite Marker Light Assembly, 24-Volt, 11614157 (All Models). Disassemble light using
figure 4-16 as follows:
(1) Unscrew six captive screws (12) on door (8).
(2) Remove door (8) and gasket (7). Captive screws (12) are fitted with retaining rings (13) and will
remain in door.
(3) Remove lamps (4), (5) and (6) from their sockets.
(4) If body replacement is necessary, remove two screws and washers (2 and 3).
(5) Remove washers (10) securing shells (11).
