TM9-2330-207-14
4-25. DOME LIGHT ASSEMBLIES
a. 24-Volt Dome Light Assemblies. Follow steps
1 thru 3 in figure 4-19 for removal and steps 4 thru
6 for installation.
STEP 1. LOOSEN CAPTIVE SCREW SECURING
DOOR. SWING DOOR DOWN OUT OF
WAY.
REMOVING OR INSTALLING DOOR
STEP 2. REMOVE FOUR SCREWS SECURING
LIGHT ASSEMBLY TO MOUNTING
BASE.
REMOVING OR INSTALLING
24-VOLT DOME LIGHT ASSY
REMOVE LIGHT ASSY FROM MOUNT-
STEP 3.
ING BASE AND DISCONNECT POSITIVE
WIRE. GROUND WIRE WAS SECURED
BY SCREW REMOVED IN STEP 2.
STEP 4.
CONNECT POSITIVE WIRE REMOVED
IN STEP 3.
POSITION LIGHT ASSY ON MOUNTING
STEP 5.
BASE AND SECURE GROUND WIRE
WITH ONE OF THE FOUR SCREWS RE-
MOVED IN STEP 2. THEN SECURE
LIGHT ASSEMBLY WITH THREE
REMAINING SCREWS.
REMOVING OR INSTALLING WIRES
STEP 6.
SWING DOOR UP AND SECURE WITH
CAPTIVE SCREW LOOSENED IN STEP 1.
