TM9-2330-207-14
STEP 1. DISCONNECT HYDRAULIC LINES
AT FITTINGS IN WHEEL CYLINDERS;
THEN DISCONNECT FLEXIBLE
HYDRAULIC HOSE AT HYDRAULIC
LINE TEE MOUNTED ON REAR OF
AXLE.
DISCONNECTING OR CONNECTING
FLEXIBLE HYDRAULIC HOSE
STEP 2. REMOVE HYDRAULIC LINE TEE
FROM AXLE.
REMOVING OR INSTALLING
HYDRAULIC LINE TEE
STEP 3. REMOVE FOUR NUTS SECURING
FOUR HYDRAULIC LINE CLIPS;
REMOVE CLIPS AND HYDRAULIC
LINE.
REMOVING OR INSTALLING
HYDRAULIC LINES AND CLIPS
STEP 4. REMOVE SIX COTTER PINS FROM
ROD BALLS.
REMOVING OR INSTALLING
COTTER PINS