TM9-2330-207-14
(3) Place hub (6) and tumbler (5) on shank (8) and secure with 5/16-18NC-2 hex nut (3) and 5/16
washer (4).
NOTE
If metal around lock was slightly deformed during removal, return it to a
serviceable condition.
(4) Position door (13) on box (1) and insert a 1/4 X 49-inch hinge pin (2) through the hinge.
--. Installation.
e
(1) Position tool box against mounting brackets and loosely secure with eight 3/8-16NC-3 X 1 cap
screws, 3/8 Iockwashers and 3/8-16NC-2 nuts.
(2) Aline the five holes along top of tool box with the nuts welded to the body frame weld. Insert
five 3/8-16NC-3 X 1 cap screws in these holes and tighten.
(3) Tighten the eight cap screws and nuts, securing tool box to brackets.
1.
Box
8.
Shank
2.
Pin
9.
Ball
3.
Nut
10.
Spring
4.
Washer
11.
Rivet
12.
Handle
5.
Tumbler
6.
Hub
13.
Door
7.
Lock