TM9-2330-207-14
-- Removal.
a.
(1) Retractable sash.
(a) Remove three binding head screws from inside of window at bottom of sash (fig. 4-71).
(b) Remove 18 binding head screws from around outside of sash (fig. 4-72).
(c) Remove retractable sash from outside.
(2) Stationary sash.
(a) Remove three binding head screws from inside of window at bottom of sash.
(b) Remove 18 binding head screws from around outside of sash (fig. 4-73).
(c) Remove stationary sash from outside.
b. Installation.
(1) Retractable sash.
(a) Position retractable sash from the outside and match with holes in semitrailer.
(b) Insert 18 No. 8 X 3/4 binding head screws around outside of sash (fig. 4-72); do not tighten.
(c) Insert three No. 8 X 3/4 binding head screws on the inside at bottom of sash (fig. 4-71) and
tighten.
(d) Tighten the 18 outside screws.
(2) Stationary sash.
(a) Position stationary sash from the outside and match with holes in semitrailer.
(b) Insert 18 No. 10 X 3/4 binding head screws around outside of sash (fig. 4-73); do not
tighten.
(c) Insert three No. 8 X 3/4 binding head screws on the outside at bottom of sash (fig. 4-71)
and tighten.
(d) Tighten the 18 outside screws.
