TM 9-2330-211-14&P
2-2.
CONTROLS AND INDICATORS (Con't)
LOADING RAMPS AND WHEEL COVER PLATES
KEY
CONTROL OR INDICATOR
FUNCTION
25
Loading Ramps
Furnished to load and unload semitrailer.
26
Ramp Clips
Two ramp clips are located on rear beam and four are located on each
side member.
Loading ramps rest on clips during loading and
unloading. Clips are constructed so that when properly positioned, the
loading ramp cannot tip.
27
Wheel Cover Plates
Depending on mission, wheel cover plates should be placed on load
bed to cover wheel openings during loading and unloading operations.
Section II. OPERATOR/CREW PREVENTIVE MAINTENANCE CHECKS
AND SERVICES (PMCS)
Page
Page
General ............................................................
Specific PMCS Procedures ................................
Operator/Crew Preventive Maintenance
Checks and Services (PMCS),
Table 2-1 ....................................................
2-3.
GENERAL
Every mission begins and ends with paperwork. There isn't much of it, but you have to keep it up. The forms and records
you fill out have several uses. They are a permanent record of the services, repairs, and modifications made on your
vehicle. They are reports to Unit maintenance and to your commander. They are also a checklist for you when you want
to know what is wrong with the vehicle after its last use, and whether those faults have been fixed. For the information
you need on forms and records, refer to DA Pam 738-750.
2-6 Change 2
