TM 9-2330-211-14&P
4-36. LANDING GEAR HANDCRANK (Con't)
ACTION
LOCATION
ITEM
REMARKS
21.
Control lever (9)
Roll pin (10)
a.
Put in through control lever (9), cover plate (6),
pawl (11), and seat into handcrank (1).
b.
Using hammer, seat roll pin (10).
22.
Cover plate (6)
Three screws (12),
Screw in and tighten using 7/16 in. socket, handle,
lockwashers (7),
and 7/16 in. wrench.
and nuts (8)
INSTALLATION
NOTE
Use flat washers (P/N PP0016-03) with optional handcrank
(P/N LG0083-03).
23.
Pin (3)
Handcrank
Place in position.
assembly
24.
Crank ratchet (5)
Bolt (2) and
Screw in and tighten using two 9/16 in. wrenches.
and pin
self-locking
nut (4)
TASK ENDS HERE
Change 2 4-109
