TM 9-2330-213-14&P
4-40. VACUUM CHAMBER AND MASTER CYLINDER REPLACEMENT (M105A2C) (Con't).
3.
Remove bolt (23), flatwasher (24), connector (25), and flatwasher (26) from cylinder (6).
4.
Remove nut (29) and Iockwasher (28) from brace (27) and cylinder (6). Discard Iockwasher.
Remove two nuts (3), Iockwashers (4), screws (5), and brace (27) from crossmember (2). Discard
5.
Iockwashers.
6.
Remove two screws (19), Iockwashers (18), cylinder (6), and spacer (20) from mounting bracket (14).
Discard Iockwashers.
7.
Remove three nuts (17), Iockwashers (16), screws (13), and mounting bracket (14) from crossmember
(15). Discard Iockwashers.
b. INSTALLATION
1.
Install mounting bracket (14) on crossmember (15) with three screws (13), new Iockwashers (16), and
nuts (17).
2.
Install spacer (20) and cylinder (6) on mounting bracket (14) with two new Iockwashers (18) and screws
(19).
TA505291
4-64