TM 9-2330-213-14&P
4-38. HYDRAULIC TANK MAINTENANCE (M105A2C).
This Task Covers:
Installation
a.
c.
Servicing
Removal
b.
Initial Setup:
Materials/Parts:
Tools/Test Equipment:
General mechanic's tool kit
Drain pan
Four Iockwashers
a.
SERVICING
1.
Remove cap (2) from hydraulic tank (3).
2.
Add brake fluid, as required, to within in. (13 mm) from top of hydraulic tank (3).
3.
Install cap (2) on hydraulic tank (3).
REMOVAL
b.
NOTE
A suitable container should be used to catch any draining brake fluid. Ensure that all
spills are cleaned up.
1.
Disconnect tube assembly (8) from hydraulic tank (3). Disconnect tube assembly (1) from cap (2).
Remove four nuts (5), Iockwashers (6), screws (7), and hydraulic tank (3) from bracket (4). Discard
2.
Iockwashers.
TA505286
