TM 9-2330-213-14&P
4-69. 110-VOLT ELECTRICAL SYSTEM MAINTENANCE (Con't).
11.
Loosen two screws (30) and remove two wire leads (3) from two circuit breakers (31),
12.
Remove four screws (29) and two circuit breakers (31) from bus bar (32). Repeat for two spare circuit
breakers (25).
13.
Remove ground wire lead (5) and two wire leads (3) from box (8).
14.
Remove connector (33) and conduit (4) from box (8).
15.
Loosen three screws (24) and screw (23) and tag three inlet wire leads (27) and ground wire lead (26).
16.
Disconnect three inlet wire leads (27) from bus bars (32) and ground wire lead (26) from terminal board
(7) .
17.
Remove connector (28) from conduit (37) and box (8).
18.
Remove two screws (21), flatwashers (22), and box (8) from wall (12).
19.
Remove connector (36) and conduit (37) from elbow (34) and floor (35).
TA505345
4-136
