TM 9-2330-213-14&P
This Task Covers:
Auxiliary Power Cable Testing
c.
a.
Receptacle Testing
b. Circuit Breaker Testing
Initial Setup:
Tools/Test Equipment:
General mechanic's tool kit
Common No. 1 shop set
Multimeter
a.
RECEPTACLE TESTING
NOTE
checks.
1.
Touch black probe (4) to terminal screw (3) on receptacle (2).
Insert red probe (1) into receptacle slot (5) on receptacle (2).
2.
Repeat steps 1 and 2 for all receptacle slots (5) and terminal screws (3). if multimeter does not indicate
3.
continuity on both sides of receptacle (2), replace receptacle. If multimeter indicates continuity, repeat
steps 1 and 2 for both upper receptacle slots.
TA505350