TM 9-2330-213-14&P
4-69. 11 O-VOLT ELECTRICAL SYSTEM MAINTENANCE (Con't).
12.
Install ground wire lead (5) on terminal board (7) and tighten screw (6).
13.
Install cover (18) on box (8) with two flatwashers (19) and setscrews (20).
Install four screws (1) on two hinges (2) and box (8).
14.
15.
Install junction box (11) on wall (12) with two screws (13).
16.
Install conduit (4) to junction box (11) with connector (10).
17.
Position two receptacles (15) inside junction box (11). Connect two wire leads (3), ground wire lead (5),
and jumper wire (9) on two receptacles and tighten four screws (14).
Install cover (16) on junction box (11) with four screws (17).
18.
FOLLOW-ON TASKS:
q Connect
auxillary power cable and check operation of 110-volt electrical system (para 2-15).
TA505349
4-140