TM 9-2330-227-14&P
TIRE AND WHEEL ASSEMBLY - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
INSTALLATION - CONTINUED
Place on stud nuts (1).
Outer tire and
13.
Six stud nuts (1)
wheel assembly (2)
NOTE
Stud nuts (1) are threaded R. or L. in direction of forward wheel rotation. To tighten
lug nuts (3) on right side, turn clockwise. To tighten lug nuts (3) on left side, turn
counterclockwise.
Screw onto stud nuts (1), and tighten in
Six lug nuts (3)
14.
Stud nuts (1)
the sequence shown below using lug nut
wrench.
Lower jack, take out from under
Axle (5)
15.
Side of frame (4)
axle (5), and stow.
where tire and wheel
assembly is being
removed
a. Using lug nut wrench, tighten as much
Six lug nuts (3)
16.
Six stud nuts (1)
as possible in sequence shown below.
b. Put chock blocks in place for tire and
wheel assembly installed (page 2-24).
NOTE
Have Organizational Maintenance tighten lug nuts to 400 to 425 ft-lb (540-560 Nm) of
torque as soon as possible.
NOTE
FOLLOW-ON MAINTENANCE: Install spare tire and wheel assembly (page 3-17).
TA231224
TASK ENDS HERE
3-16
