TM 9-2330-227-14&P
LANDING GEAR LEGS
This task covers:
Cleaning (page 3-20)
INITIAL SETUP
Materials/Parts
Personnel Required
Brush, acid swabbing (item 4,
One
Rags, wiping (item 16, appendix E)
Solvent, drycleaning PD-680
(item 18, appendix E)
ACTION
ITEM
LOCATION
REMARKS
CLEANING
Lower portion
Landing gear
a. Using rags, wipe off any buildup of
of landing
leg (1)
grease and dirt.
gear leg (1)
above shoe (2)
WARNING
Drycleaning solvent PD-680 is both toxic and flammable. Avoid prolonged breathing of
vapors, and avoid skin contact. Use only in well-ventilated area, and keep away from
open flame or excessive heat. Injury to personnel could occur.
b. Using brush and drycleaning solvent,
clean.
C. Allow to dry.
d. Lubricate in accordance with
Lubrication Chart (page 4-5).
3-20
