TM 9-2330-227-14&P
SPARE TIRE AND WHEEL ASSEMBLY - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
REMOVAL- CONTINUED
WARNING
Weight of spare tire and wheel assembly will cause lug nut wrench to spin freely if not
held securely after pawl has been taken off ratchet teeth. Freely spinning lug wrench
may cause injury to personnel. Allow spare tire and wheel assembly to lower slowly.
Ratchet
Using lug nut wrench, turn clockwise
2. Spare tire and wheel
wheel (2)
enough to free pawl (3).
assembly carrier (1)
Pawl (3)
3.
Ratchet
Using lug nut wrench, turn counterclockwise
4.
wheel (2)
to lower spare tire and wheel assembly (4).
a. Drop down and angle one end up center
Support
5.
hole in spare tire and wheel
assembly (5)
assembly (4).
b. Lift out of spare tire and wheel
assembly (4).
INSTALLATION
Spare tire and
Place under spare tire and wheel assembly
6.
wheel assembly (4)
carrier (1) with wheel dish (6) down.
Support
Put one end down through center hole in
7.
assembly (5)
spare tire and wheel assembly (4), and
have support assembly (5) lie flat.
Support assembly (5) must not block
any holes in spare tire and wheel
assembly (4).
Pawl (3)
Put on ratchet wheel (2).
8. Spare tire and wheel
assembly carrier (1)