TM 9-2330-227-14&P
CLEARANCE LIGHT ASSEMBLY - CONTINUED
INSTALLATION - CONTINUED
NOTE
FOLLOW-ON MAINTENANCE: Check operation of lights (page 2-22).
TASK ENDS HERE
INSIDE DOMELIGHT, 24-VOLT
This task covers:
INITIAL SETUP
Tools
Personnel Required
One
Pliers, long round-nose
Screwdriver, cross-tip, number two
Screwdriver, flat-tip, 3/16-inch
Wrench, box-end, 7/16-inch
Wrench, box-end, 7/8-inch
ACTION
ITEM
REMARKS
LOCATION
NOTE
All 24-volt inside domelights are removed, repaired, and installed the same way. This
task is for one; repeat for the others.
If circuit marker bands are missing or not readable, replace (page 4-73).
4-61