TM 9-2330-227-14&P
CLEARANCE LIGHT ASSEMBLY - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
REMOVAL - CONTINUED
NOTE
If circuit marker bands are missing or not readable, replace (page 4-73).
Four screws (9) and
Using number two cross-tip screwdriver,
Light body (2) and
7.
Iockwashers (10)
unscrew and take out.
outside wall (8)
Light body (2),
Pull light body out from wall (8) until
Outside wall (8)
8.
connector halves (12) are outside of
gasket (11), and
connector
wall (8).
halves (12)
Wire harness (13)
Take apart.
Connector
9.
halves (12)
Make sure connector half to wire
and light body (2)
harness stays outside of wall (8).
Gasket (11)
Using putty knife, scrape off.
Light body (2)
10.
4-59