TM 9-2330-227-14&P
WIRE CONNECTOR - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
FEMALE CONNECTOR REPAIR - CONTINUED
16.
New terminal (9)
Slide onto wire lead (7), and using
crimping tool, crimp end.
Shell (8) and
Slide down over terminal (9) until seated.
17.
sleeve (10)
Connector halves
Apply compound to outside of female
18.
connector, and push together until seated.
(5) and (6)
Apply power, turn on, and check operation
Semitrailer lights
19.
CIRCUIT MARKER BAND REPLACEMENT
a.
Using 3/16-inch flat-tip screwdriver,
Marker band (11)
20.
open tab ends (11) and take off.
Note number on band (11).
b.
Get rid of band (11).
Using etching tool, etch proper number.
New marker band (11) a.
See Electrical Schematic on
b.
Place on wire lead, and using crimping
tool, bend tab ends (12) over-wire.
4-73
