INSIDE DOMELIGHT, 110-VOLT - CONTINUED
ACTION
LOCATION
ITEM
REMARKS
WARNING
Contact with live 110-volt electrical wires could result in serious injury or death. Make
sure power source is disconnected before performing maintenance on the electrical
system.
NOTE
All 110-volt inside domelights are removed, repaired, and installed the same way.
This task is for one; repeat for the others. Tag wires to aid in installation page 4-4).
REMOVAL
1. D o o r
Captive screw (2)
a. Using 3/16-inch flat-tip screw-
assembly (1)
driver unscrew all the way.
b. Open door(1).
Lamp (4)
2. S o c k e t
Unscrew, and take off.
assembly (3)
3. Box assembly (5)
Four screws (7)
a. Using number two cross-tip screw-
and van
driver, unscrew and take off.
ceiling (6)
b. Take off assembly (5).
4. S o c k e t
Two screws (8)
a. Using 3/16-inch flat-tip screwdriver,
assembly (3)
and wires (9)
unscrew screws (8) part way.
b. Take off wire (9).
4-66
