TM 9-2330-227-14&P
WIRE CONNECTOR - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
MALE CONNECTOR REPAIR - CONTINUED
a.
Cut off lead (1) using cutting pliers.
Contact (2)
5. Wire lead (1)
Be sure enough wire remains to make
connection after repair.
Get rid of contact (2).
b.
a.
Using wire stripper, strip insulation
Wire lead (1),
6.
at end equal to depth of new
contact (2), and
contact (2).
shell (3)
b.
Slide on new shell, and apply
compound to wire lead (1).
c.
Slide end into new contact (2), and
using crimping tool, crimp.
Place on lead (1) at contact (2).
Retaining
7.
washer (4)
Slide down wire lead (1) until
Shell (3)
8.
washer (4) seats.
Apply compound to outside of female
Connector halves
9.
connector, and push together until seated.
(5) and (6)
Apply power, turn on, and check operation.
Semitrailer lights
10.
FEMALE CONNECTOR REPAIR
Separate halves.
Connector halves
11. Wire lead (7)
(5) and (6)
Slide up wire lead (7) until clear of
Shell (8)
12. Connector
terminal (9).
half (5)
Wire lead (7)
Using diagonal cutting pliers, cut off
13.
terminal (9).
Be sure to leave enough lead for
connection after repair.
a.
Slide off wire lead (7).
14. Wire lead (7)
Shell (8) and
Get rid of shell (8) and sleeve (10).
sleeve (10)
b.
15.
Wire lead (7),
a.
Using wire stripper, strip insulation
1/84-inch (3.18 mm) from end,
shell (8), and
sleeve (10)
b. Slide on new shell (8) and sleeve
(10), and apply compound to wire
end lead (7).
