TM 9-2330-227-14&P
BACKING PLATE AND SPIDER ASSEMBLY, TWO-WHEEL CYLINDER - CONTINUED
ACTION
REMARKS
ITEM
LOCATION
REMOVAL - CONTINUED
b. Take screw (7) out of spider (1).
3. Continued
Take out.
Gear (9)
4. Spider (1) and
worm (8)
Washer (11)
Using snapring pliers, take off.
5. Spider (1) and
ring (10)
Ring (10)
Using long round-nose pliers, take off.
6. Spider (1) and
worm (8)
7. Spider (1)
Stud (6) with
a. Using ball-peen hammer, tap stud (6)
worm (8) and
through spider (1).
b. Using long round-nose pliers, take
sleeve (12)
out and separate.
c. Perform steps 3 thru 7b for remaining
adjustment assembly.
Take off.
Spider (1)
8. Backing plate (3)
REPAIR OF SPIDER ASSEMBLY
Put in place.
Worm (8)
9. Stud (6)
4-93
