TM 9-2330-227-14&P
MASTER CYLINDER - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
REMOVAL - CONTINUED
Fitting (15)
Using 5/8-inch and l-inch open-end
7. Vent tube (13)
wrenches, unscrew and take off.
and filler cap (14)
Screw (17)
Using 3/16-inch flat-tip screwdriver,
8. Clamp loop (16)
unscrew and take off.
Clamp loop (16)
Using 3/16-inch flat-tip screwdriver,
9. Vent hose (18)
pry loose.
Vent hose (18)
Take off.
10. Vent tube (13)
with clamp loop (16)
Take off.
Clamp loop (16)
11. Vent hose (18)
Using 1-inch open-end wrench,
a.
Filler cap (14) and
12. Master cylinder
unscrew and take off.
spacer ring (19)
body (1)
Take master cylinder body (1) out
b.
of vise.
INSTALLATION
Put master cylinder body (1) in vise.
Drainplug (2) and
a.
13.
Screw in, and tighten using 3/4-inch
gasket (3)
b.
open-end wrench.
4-101
