WHEEL CYLINDERS, TWO-WHEEL CYLINDER BRAKES - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
NOTE
Both sets of wheel cylinders are removed and installed the same way. This task is for
one set; repeat for the other.
Bolt (2)
a. Put drain pan under.
1. Fitting (1)
b. Using 11/16-inch box-end wrench,
unscrew part way.
Fitting (1) with
Using 3/4-inch open-end wrench, unscrew
2. Top wheel
gasket (5)
and take out.
cylinder (3) and
connection (4)
Using 11/16-inch box-end wrench,
Bolt (8) with
3. Bottom wheel
gasket (9)
unscrew and take out.
cylinder (6) and
connection (7)
Two bleeder
Using 7/16-inch box-end wrench, unscrew
4. Two wheel
screws (10)
and take out.
cylinders (6)
and (3)
Four screws (12)
Using 1/2-inch socket and ratchet handle
5. Two wheel
with 1/2-inch drive, unscrew and take off.
cylinders (6)
and (3) and
backing plate (11)
Two wheel
Take off and separate.
6. Backing plate (11)
cylinders (6) and (3)
shields (14)
INSTALLATION
Two shields (14) and
Put in place.
7.
wheel cylinders (6)
and (3)
Four lock-
Screw in, and tighten using 1/2-inch
8. Two wheel
washers (13)
socket and ratchet handle with 1/2-inch
cylinders (6),
screws (12)
and (3), and
drive.
backing plate (11)
Two bleeder
Screw in, and tighten using 7/16-inch
9. Two wheel
screws (10)
box-end wrench.
cylinders (6)
and (3)
4-104
