TM 9-2330-227-14&P
MASTER CYLINDER - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
INSTALLATION - CONTINUED
14. Master cylinder
Filler cap (2) and
Screw in, and tighten using 1-inch
spacer ring (3)
body (1)
open-end wrench.
Clamp loop (5)
15. Vent hose (4)
Put in place.
16. Vent tube (6)
Vent hose (4)
Put in place.
with clamp loop (5)
17. Clamp loop (5)
Screw (7)
Screw in, and tighten using 3/16-inch
flat-tip screwdriver.
Fitting (8)
18. Vent tube (6)
Screw in, and tighten using 5/8-inch
and filler cap (2)
and 1-inch open-end wrenches.
19.
Master cylinder
Take out of vise equipped with jaw caps.
body (1)
Boot (9), collar
Put in place.
20. Master cylinder (1)
(10), and strap (11)
Master cylinder
Put on.
21. Bracket studs (12)
body (1)
Three lock-
22. Master cylinder
Screw in, and tighten using 9/16-
washers (13) and
inch socket, 5-inch extension, and
body (1) and
nuts (14)
ratchet handle with 1/2-inch drive.
bracket studs (12)
Adapter (15) and
Wrap threads
clockwise
a.
23. Master cylinder
gasket (16)
two turns with
teflon tape.
body (1)
tighten using 11/16-
b. Screw in, and
inch open-end
wrench.
24. Adapter (15)
Screw in, and tighten using 1/2-inch
Nut (17)
a.
and 5/8-inch open-end wrenches.
Take drain pan out.
b.
4-102
