TM 9-2330-227-14&P
MASTER CYLINDER
This task covers:
INITIAL SETUP
Materials/Parts
Tools
Caps, vise jaw
Extension, 1/2-inch drive, 5-inch
Personnel Required
Pan, drain
One
Screwdriver, flat-tip, 3/16-inch
Socket, 1/2-inch drive, 9/16-inch
Equipment Condition
Vise, machinist's
Wrench, open-end, 1/2-inch
Wrench, open-end, 5/8-inch
Wrench, open-end, 11/16-inch
Wrench, open-end, 3/4-inch
Wrench, open-end, 1-inch
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
Drainplug (2) and
a. Place drain pan under drainplug (2).
1. Master cylinder
b. Using 3/4-inch open-end wrench,
gasket (3)
body (1)
unscrew, take out, and let drain.
Nut (5)
Using 1/2-inch and 5/8-inch open-end
2. Adapter (4)
wrenches, unscrew and take off.
Adapter (4) and
Using 5/8-inch open-end wrench, unscrew
3. Master cylinder
gasket (6)
and take off.
body (1)
Three nuts (8) and
Using 9/16-inch socket, 5-inch extension,
4. Master cylinder
Iockwashers (9)
and ratchet handle with 1/2-inch drive,
body (1) and
unscrew and take off.
bracket studs (7)
Master cylinder
a. Take off.
5. Bracket studs (7)
body (1)
b. Put in vise equipped with jaw caps.
Take off.
Collar (11) and
6. Boot (10)
strap (12)
4-1OO