TM 9-2330-227-14&P
WINDOWS - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
ASSEMBLY - CONTINUED
Put adhesive on frame (1), and let
Window frame (1)
Weather
17.
a.
dry until tacky.
stripping (2)
Put weather stripping (2) in place,
b.
and push down until fully seated all
around.
c.
Let dry.
Eight spacers (3)
Put in place.
18.
26 screws (4)
19.
Screw in, and tighten using 3/16-inch
fiat-tip screwdriver.
Blackout
Put in place.
20.
brackets (5)
17 screws (6)
Blackout
Screw in, and tighten using 3/16-inch
21.
brackets (5) and
flat-tip screwdriver.
window frame (1)
22.
Window frame (1)
Handle bracket (7)
Put in place.
Handle bracket (7)
Four screws (8)
23.
Screw in, and tighten using 3/16-inch
and window
flat-tip screwdriver.
frame (1)
INSTALLATION
Put in place.
Van body (9)
Hinge (10)
24.
Hinge (10) and
Six screws (11)
Screw in, and tighten using number two
25.
van body (9)
cross-tip screwdriver.
Hinge (10)
With aid of assistant, hold assembly (2)
Window assembly (12)
26.
at an angle, and using ball-peen hammer,
tap into hinge (10).
Window assembly (12)
Screw (13)
Screw in, and tighten using 1/8-inch
27.
fiat-tip screwdriver.
and hinge (10)
Release latch (14), and hold.
Window assembly (12)
Handle (16)
a.
28.
Have assistant lift window (12) up
b.
inside latch (14),
and feed handle (16) through
and screen (15)
screen (15) opening over latch (14).
Clip (17)
Using slip-joint pliers, bend in place.
Handle (16)
29.
4-160
