TM 9-2330-227-14&P
BLACKOUT PANELS - CONTINUED
ACTION
ITEM
REMARKS
LOCATION
NOTE
All panels are removed and installed the same way. This task is for one; repeat for the
others.
REMOVAL
Two screws (2),
Using number two cross-tip screwdriver
1. Lower corners of
flat washers (3),
and 8-inch adjustable wrench, unscrew
two brackets (1)
Iockwashers (4),
and take off.
and nuts (5)
Panel (6)
2.
Slide out.
Four strips (7)
Take off.
3. Panel (6)
Eight screws (9),
Using number two cross-tip screwdriver
4. Two brackets (1)
flat washers (10),
and 8-inch adjustable wrench, unscrew
and van body (8)
Iockwashers (11),
and take off.
and nuts (12)
Two brackets (1)
Take off.
5. Van body (8)
INSTALLATION
Put in place.
Two brackets (1)
6.
Screw in, and tighten using number two
Eight screws (9),
7. Two brackets (1)
cross-tip screwdriver and 8-inch
flat washers (10),
and van body (8)
adjustable wrench.
Iockwashers (11),
and nuts (12)
Put in place.
Four strips (7)
8. Panel (6)
Slide in place.
Panel (6)
9. Two brackets (1)
10.
Two screws (2),
Screw in, and tighten using number two
flat washers (3),
cross-tip screwdriver and 8-inch
Iockwashers (4),
adjustable wrench.
and nuts (5)