TM 9-2330-227-14&P
DOORS
This task covers:
a. Removal (page 4-166)
b. Installation (page 4-168)
INITIAL SETUP
Tools
Materials/Parts - Continued
Bar, pry
Rags, wiping (item 16, appendix E)
Hammer, hand, ball-peen, 2-lb
Solvent, drycleaning PD-680 (item 18,
Handle, ratchet, 1/2-inch drive
Knife, putty
Screwdriver, cross-tip, number two
Personnel Required
Screwdriver, fiat-tip, 3/16-inch
Socket, 1/2-inch drive, 1/2-inch
Two
Wrench, box-end, 1/2-inch
Equipment Condition
Materials/Parts
Insulation removed as required (page 4-173).
Adhesive (item 1, appendix E)
Brush, acid swabbing (item 4, appendix E)
ACTION
ITEM
REMARKS
LOCATION
REMOVAL
1. Two hinges (1)
Six screws (3)
With aid of assistant, and using 1/2-inch
and van body (2)
and nuts (4)
socket, ratchet handle with 1/2-inch
drive, and 1/2-inch box-end wrench,
unscrew and take off.
2. Van body (2)
Door (5)
With aid of assistant, open and take off.
Two screws (8)
Using number two cross-tip screwdriver,
3. Top bracket (6)
and unscrew take off.
and paneling (7)
Rear doors have four screws.
