TM 9-2330-231-14&P
COMPOSITE LIGHT LAMP AND LENS - CONTINUED
INITIAL SETUP
Tools
Materials/Parts
Screwdriver, flat-tip
Lamp(s) (as required)
Packing (if required)
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Door (1)
Six captive
Using screwdriver, unscrew from
screws (2)
housing (3). Screw will remain
with door (I).
2. Housing (3)
Door assembly (1)
Remove.
and packing (4)
Discard packing (4) if damaged.
3. Four sockets (5)
Four lamps (6)
Remove by pushing in and turning
counterclockwise.
INSTALLATION
4.
Four sockets (5)
Four lamps (6)
Install by pushing in and turning
clockwise.
5. Housing (3)
Packing (4) and
Place in position.
door assembly (1)
install new packing if necessary.
6. Door assembly (1)
Six captive
Using screwdriver, tighten into
screws (2)
housing (3).
TASK ENDS HERE
TA223862
4-19
