TM 9-2330-231-14&P
MARKER LIGHT
This Task Covers:
a. Lamp and lens removal (page 4-24)
c. Marker light installation (page 4-25)
b. Marker light removal (page 4-24)
d. Lamp and lens installation (page 4-25)
Initial Setup
Tools
Equipment Condition
Screwdriver, flat-tip
Composite light removed (page 4-20).
Wrench, open-end, 3/8-inch
Materials/Parts
Lamp (if required)
Lens (if required)
ACTION
LOCATION
ITEM
REMARKS
LAMP AND LENS REMOVAL
1. Door assembly (1)
Two screws (2)
Using flat-tip screwdriver, remove.
2. Light box (3)
Door assembly (1)
Remove.
3. Lens (4)
Two nuts (5)
Using flat-tip screwdriver, pry off.
4. Door assembly (1)
Lens (4)
Remove.
5. Plate (6)
Lamp (7)
Push in, turn counterclockwise, and
remove.
MARKER LIGHT REMOVAL
6. Lamp lead (8)
Connectors
Separate.
(9 and 10)
7. Plate (6)
Four screws (11),
Using flat-tip screwdriver and
four lockwashers
wrench, remove.
(12), and four
nuts (13)
8. Light box (3)
Plate (6) and
Remove.
gasket (14)
4-24
