TM 9-2330-231-14&P
INTERVEHICULAR CABLE
This Task Covers:
a. Removal (page 4-26)
b. Installation (page 4-27)
Initial Setup
Tools
Screwdriver, flat-tip
Screwdriver, cross-tip
Wrench, open-end, 1 1/32-inch
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Connector
Four screws (2) and
Using flat-tip screwdriver, remove.
cover (1)
four lockwashers (3)
2. Left, front
Connector cover (1)
Remove.
drawbar (4)
NOTE
Identify matching connectors using tags or tape if identification bands are missing.
3. Intervehicular
Nut (6), lockwasher
Using wrench and cross-tip screwdriver,
cable (5)
(7), screw (8),
remove.
clamp (9), and ex-
tension spring (10)
4. Clip
Screw (12), washer
Using flat-tip screwdriver, remove.
assemblies (11)
(13), and ground
lead (14)
5.
Mating connectors
Remove and separate.
(15 and 16)
6. Left, front
Ihtervehicular
Remove.
drawbar (4)
cable (5)
4-26
