TM 9-2330-231-14&P
MAIN HARNESS
This Task Covers:
Initial Setup
Tools
Materials/Parts
Extension, 6-by 1/4-inch square
Grommet (if required)
drive
Wire ties (as required)
Handle, reversible, 1/4-inch square
drive
Equipment Condition
Pliers, diagonal-cutting
Screwdriver, cross-tip-
Screwdriver, flat-tip
Socket, universal, 7/16- by 1/4-inch
square drive
ACTION
LOCATION
ITEM
REMARKS
REMOVAL
1. Connector
Four screws (2) and
Using cross-tip screwdriver, remove.
cover (1)
2. Left, front
Connector cover (1)
Remove.
drawbar (4)
NOTE
Identify matching connectors using tags or tape if identification bands are not installed.
3. Clip
Mated
Remove from clip assemblies (5) and
assemblies (5)
connectors (6)
separate.
4. Left drawbar (7)
Four screws (8) and
Using cross-tip screwdriver, remove.
5. Main harness (10)
Four clamps (11)
Remove.
6. Left drawbar (7)
Seven screws (12),
Using 7/16-inch socket, 6-inch extension,
seven nuts (13),
and cross-tip screwdriver, remove.
and seven lock-
washers (14)
4-28