TM 9-2330-235-14&P
4-37. SUSPENSION ARM MAINTENANCE (M514) (Con't).
CAUTION
Before removing or disconnecting attaching
parts, support rear end of suspension arm to
release pressure on torsion bar support.
7. Support suspension arm (9) with a suitable
jackstand. Remove eight screws (50) and lockwashers
(49) securing outer, center, and inner bearings
supports (48, 51, and 52) to support bracket (46).
Remove suspension arm and bearing supports from
frame. Discard lockwashers.
b. DISASSEMBLY
1. Remove setscrews (47), outer bearing support
(48), and center bearing support (51) from suspension
arm (9).
2. Remove cotter pin (26) and straight pin (27)
from clevis (19). Discard cotter pin.
4-85
