TM 9-2330-235-14&P
4-38. TORSION BAR ADJUSTMENT (M514) (Con't).
11. Lower frame until all weight of trailer is on wheels. Measure distance from top of frame to ground. If this distance
is near enough to 22 in. (55.9 cm) that a minor adjustment will correct the error, complete this procedure then
perform MINOR ADJUSTMENT (subpara a). If this distance is not near enough that a minor adjustment will
correct the error, repeat step 10 until adjustment is correct.
12. Install flatwasher (13), new lockwasher (15), and nut (16) on inner stud (14). Secure with new cotter pin (18).
13. Install new expansion plug (17) in support (11).
14. Install stud (21) in torsion bar (12).
15. Install flatwasher (20), new lockwasher (28), and nut (27) on stud (21). Secure with new cotter pin (22).
16. Install new gasket (23) and cover (24) with two new lockwashers (25) and screws (26).
17. Connect shock absorber (7) to suspension arm (10) with flatwasher (8) and bolt (9).
18. Connect clevis (6) to suspension arm (10) with straight pin (5) and new cotter pin (29).
4-93