TM 9-2330-246-14
4-25. 208-VOLT POWER ENTRY PANEL AND COVER REPLACEMENT (M348A2H) (Con't).
b. CLEANING AND INSPECTION
WARNING
Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective goggles
and gloves, and use only in a well-ventilated area. Avoid contact with skin, eyes, and
clothes, and DO NOT breathe vapors. DO NOT use near open flame or excessive heat.
The solvent's flash point is 100F-138F (38C-59C). If you become dizzy while
using cleaning solvent, immediately get fresh air and medical help. If solvent contacts
eyes, immediately wash your eyes and get medical aid.
1. Clean all parts with dry cleaning solvent and dry thoroughly. Ensure that all gasket and weatherstrip mounting
surfaces are clean and dry.
2. Inspect cover plate, panel assembly, and cover assembly for warpage and distortion. Straighten if necessary.
Inspect cover plate hinge and shield hinges for straightness and deterioration. Replace defective hinges.
3.
4.
Inspect all other parts for defects and damage. Replace defective and damaged parts.
TA700175
4-43
