TM 9-2330-246-14
4-24. 208-VOLT POWER ENTRY PANEL CONNECTOR REPLACEMENT (M348A2H).
This Task Covers:
Installation
c.
Removal
a.
b.
Cleaning and Inspection
Initial Setup:
Materials/Parts:
Equipment Conditions:
208-volt power disconnected from semitrailer.
Adhesive (Item 1, Appendix E)
z Dry cleaning solvent (Item 13, Appendix E)
Tools/Test Equipment
Solder (Item 23, Appendix E)
General mechanic's tool kit
Marker tags (Item 24, Appendix E)
Soldering iron
One gasket
q Five Iockwashers
Personnel Required: Two
NOTE
Three connectors on panel assembly are replaced the same way.
a. REMOVAL
From inside semitrailer, remove 14 screws (3) and cover plate (4) from cover assembly (1).
1.
Remove gasket (2) from cover plate (4). Discard gasket.
2.
NOTE
Check terminal boards and wires for proper circuit markers.
Tag wires from connector (9) to be removed. Loosen screws on terminal board (5) and disconnect wires.
3.
TA700171
4-38
