TM 9-2330-247-14&P
4-26. CHASSIS WIRING HARNESS (Con't)
ACTION
ITEM
REMARKS
LOCATION
14.
Wire lead (22)
Connector to
a. Using stripper, strip insulation at end equal to
to be repaired
depth of new contact (25).
b. Apply insulating compound to end and slide on
new shell (23).
c. Slide end into new contact (25) and crimp using
crimping tool.
15.
Wire lead (22)
Retaining
Put on.
washer (24)
16.
Slide down until retaining washer (24) seats.
Shell (23)
NOTE
If chassis wiring harness was removed from frame, skip step
17.
17.
Two connectors
Push together until seated and install in clips (12
(14 and 15) or
or 21).
(18 and 19)
If repairing male connector only, go to
FOLLOW-ON MAINTENANCE.
FEMALE CONNECTOR REPAIR
NOTE
If chassis wiring harness was removed from frame, skip step
18.
18.
Two clips (12
Two connectors
Pull out and take apart.
or 21)
(14 and 15) or
(18 and 19)
TA701O56
4-28
