TM 9-2330-247-14&P
4-26.
CHASSIS WIRING HARNESS (Con't)
ACTION
REMARKS
ITEM
LOCATION
REMOVAL
Eight screws (1),
Using no. 2 cross-tip screwdriver and
in. open-
1.
Eight harness
end wrench, unscrew and take off.
clamps (2)
nuts (5), and
Iockwashers (4)
Using
in. flat-tip screwdriver, spread and pull off.
Eight harness
2.
Chassis wiring
harness (3)
clamps (2)
Pull out and take apart.
Two clips (21)
12 connectors
3.
(18 and 19)
Pull out and take apart
4.
16 connectors
Two rear corner
(14 and 15)
On older models, service stoplight-
clips (12)
taillight will have three connectors. Black-
out stoplight connector on the right side
will go directly into light body.
Frame (7)
Using cutting pliers, cut where necessary and pull
Chassis wiring
5.
out.
harness (3)
4-26