TM 9-2330-247-14&P
CHASSIS WIRING HARNESS
This Task Covers.
d. Circuit Marker Band Replacement
a.
Removal
e.
Installation
b. Male Connector Repair
Female Connector Repair
c.
Initial Setup:
Materials/Parts:
Equipment Conditions:
Intervehicular cable disconnected from towing ve-
Tools/Test Equipment:
Etcher, electric
Pliers, diagonal-cutting
Pliers, round-nose, long
Screwdriver, cross-tip, no. 2
Screwdriver, flat-tip, in.
Stripper, wire, hand
Tool, crimping
Wrench, open-end,
in.
ACTION
REMARKS
ITEM
LOCATION
NOTE
Chassis wiring harness does not have to be removed to replace or repair connectors
and circuit marker bands. If replacing male connectors only, go to step 9. If replacing
female connectors only, go to step 18. If replacing circuit marker bands only, go to step
26.
